tcl command set for pcb
"" - optional
<> - user value
[] - constrained value


arc draw <llx,lly> <urx,ury>

buffer break_up
buffer clear
buffer convert
buffer copy <x,y>
buffer cut <x,y>
buffer mirror [90degCW|90degCCW]
buffer paste <x,y>
buffer rotate [90degCW|90degCCW]
buffer save <filename>
buffer select [1|2|3|4|5]

delete object [all|connected]
delete object <x,y>
delete "selected"
delete track
delete track [all|auto_only]

deselect object [all|connected]
deselect object <x,y>

drc minimum_space <minspace> minimum_width <minwidth> 
    minimum_overlap <minoverlap> minimum_silkwidth <minsilkwidth>
drc run

grid decrement [5mil|1mm]
grid display [on|off]
grid increment [5mil|1mm]
grid realign
grid set [0.1mil|0.5mil|1mil|0.1mm|10mil|1mm|25mil|50mil|100mil]

info drill_summary
info found_pins_pads_report
info object_report

layer active [1|2|3|4|5|6|7|8]
layer group <l1,l2,...>
layer invisible [1|2|3|4|5|6|7|8|all]
layer name <layername>
layer visible [1|2|3|4|5|6|7|8|all]

layout center
layout name <layoutname>
layout redraw
layout size <width> <height>

line draw <llx,lly> <urx,ury>
line size [+10mil|-10mil]
line selected_size [+10mil|-10mil]
line clearance [+10mil|-10mil]
line selected_clearance [+10mil|-10mil]

mode [select|delete|pan|lock|rotate|insert]
mode [via|line|arc|text|rectangle|polygon|buffer|thermal]

object connect_info <x,y>
object convert "element"
object copy buffer [1|2|3|4|5] "<x,y>"
object cut buffer [1|2|3|4|5] "<x,y>"
object delete <x,y>
object insert <x,y>
object move "otherside"
object paste buffer [1|2|3|4|5] "<x,y>"
object rotate
object rotate <x,y>
object select <x,y>

open buffer [1|2|3|4|5] <filename>
open layout <filename>
open netlist <filename>

option all_dir_lines [on|off]
option auto_enforce_drc_clearance [on|off]
option auto_swap_line_start_angle [on|off]
option auto_zero_delta_measurements [on|off]
option check_polygons [on|off]
option crosshair_shows_drc_clearance [on|off]
option crosshair_snaps_to_pins_pads [on|off]
option new_lines_arcs_clear_polygons [on|off]
option only_autorouted_nets [on|off]
option orthogonal_moves [on|off]
option rubber_band_mode [on|off]
option show_autorouter_trials [on|off]
option thin_draw [on|off]
option unique_element_names [on|off]

pad size [+10mil|-10mil]

pin square [on|off]
pin hole [+10mil|-10mil]
pin size [+10mil|-10mil]
pin clearance [+10mil|-10mil]

polygon draw <llx,lly> <urx,ury>, ... <llx,lly>

print driver eps rotate [on|off] mirror [on|off] color [on|off] invert [on|off] 
      outline [on|off] alignment [on|off] drillhelper [on|off] dos [on|off] 
      scale <value> <filename>
print driver gerber invert [on|off] outline [on|off] alignment [on|off] 
      drillhelper [on|off] dos [on|off] scale <value> <filename>
print driver ps rotate [on|off] mirror [on|off] color [on|off] invert [on|off] 
      outline [on|off] alignment [on|off] drillhelper [on|off] dos [on|off] 
      media [a3|a4|a5|letter|ledger|legal|executive|c-size|d-size|11x17|user] 
      scale <value> <filename>

rats auto_route
rats optimize

rectangle draw <llx,lly> <urx,ury>

redo

route [all|rats]
route debumpify
route miter
route optimize
route optimize auto [on|off]
route optimize nets [all|auto_only]
route ortho
route simple
route unjaggy

save element [<name>|all] <filename>
save layout "<filename>"

scan
scan reset [pads_pins_vias|lines_polygons|all]

select element <name>
select object [all|connected]
select object <x,y>
select pad <name>
select pin <name>
select text <name>
select via <name>

show element_name [description|reference|value]
show solder_mask [on|off]
show solder_side [on|off]

style adjust [<stylename>] name <stylename> line_width <linewidth> 
      via_hole <viahole> via_size <viasize> clearance <clearance>
style use stylename

text set <size>
text size [+10mil|-10mil]
text selected_size [+10mil|-10mil]
text write <string> <x,y>

thermal draw <x,y>

undo 
undo clear_history

via draw <x,y>
via hole [+10mil|-10mil]
via selected_hole [+10mil|-10mil]
via nudge
via size [+10mil|-10mil]
via selected_size [+10mil|-10mil]
via clearance [+10mil|-10mil]
via selected_clearance [+10mil|-10mil]
via trim

zoom [in|out]
zoom set [4:1|2:1|1:1|1:2|1:4|1:8|1:16]