[Eda-dev] Line wrapping in netgen LVS reports?

Matthew Guthaus mrg at ucsc.edu
Tue Jul 16 13:53:42 EDT 2019


After I sent that, I also realized that "debug on" will revert to the list
based report rather than side-by-side. That is also useful for now...

On Tue, Jul 16, 2019 at 10:49 AM Tim Edwards <tim at opencircuitdesign.com>
wrote:

> Hello Matt,
>
>  > In the LVS reports, the columns are a fixed size. Sometimes this crops
>  > potentially useful information. Is there a way to configure this? For
>  > example, in the following, the second element attached to the net is
>  > not fully shown on the left side.
>  >
>  > Thanks,
>  > Matt
>  >
>  >    NET mismatches: Class fragments follow (with fanout counts):
>  >    Circuit 1: bank2_1rw_0w_0r_single          |Circuit 2:
>  > ...
>
> There is an output in JSON format that you can enable with the "-json"
> option to the "lvs" command.
>
> It would take quite a bit of coding work to get the output to have
> an adjustible width.  The easier option would probably be to convert
> the JSON output viewing script that I have on the efabless platform for
> the netgen distribution.  It only needs to have a few dependencies on
> the efabless file system structure changed.
>
>                                         Regards,
>                                         Tim
>
> +--------------------------------+-------------------------------------+
> | R. Timothy Edwards (Tim)       | email: tim at opencircuitdesign.com    |
> | Open Circuit Design            | web:   http://opencircuitdesign.com |
> | 19601 Jerusalem Road           | phone: (240) 489-3255               |
> | Poolesville, MD 20837          | cell:  (408) 828-8212               |
> +--------------------------------+-------------------------------------+
>


-- 
Matthew Guthaus
Professor, Computer Science & Engineering
University of California Santa Cruz
https://www.soe.ucsc.edu/people/mrg
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.opencircuitdesign.com/pipermail/eda-dev/attachments/20190716/9c843eb3/attachment.html>


More information about the Eda-dev mailing list